(CP)Confirmation Prototype确认样车
<FS>Final Status最终状态
4s店买车流程(J1)Job 1整车投产
(PT)P/T Design Complete动力传动系统设计结束
PT（P/T）Power Train动力传动系统
(ST)Surface Transfer表面参数传递
<CC>Change Cut-Off更改完成
<LR>Launch Readiness投产准备就绪
<LS>Launch Sign-Off投产验收
<PA>Program Approval项目批准
<PH>Proportions & Hardpoints比例与固定点
诸城汽车
<PR>Product Readiness产品准备就绪平行停车
<PS1>Pre<SI> Milestone 1SI前里程碑1
<PS2>Pre<SI> Milestone 2SI前里程碑2
<SC>Strategic Confirmation策略确认
<SI>Strategic Intent策略意向
<SP>Strategic Planning策略计划
(SP)Structural Prototype样车结构
(TTO)Tool Try-Out工装设备试运行
Global 8D Eight disciplinary Actions
G8D
(福特公司解决问题的标准方法)
14D
More Detailed than Global 8D (used to contain
and resolve stop-shipment/recall problems)更详细的细节(包括并解决停止运货/召回问题)
1MIS One Month in Service投入使用1个月1PP First Production Proveout第一次试生产
2PP Second Production Proveout第二次试生产
3MIS Three Months in Service投入使用3个月
4P Production Process Proveout Program生产程序验证项目
AAA American Automobile Association美国汽车工业联合会
ABS Affordable Business Structure可承受商业结构
ABS Anti skid brake system防抱死制动系统
AIAG Automotive Industry Action Group 机动车工业行动小组
AIC Accelerated Implementation Centre快速实施中心
AIM Automated Issues Matrix问题结构图
AIMS Automated Issues Matrix System问题结构图系统
AME Advanced Manufacturing Engineering先进制造工艺
AMPPE Advanced Manufacturing Pre-Program Engineering先进项目前制造工艺ANOVA Analysis of Variance多样性分析
AP Attribute Prototype设计样车
APEAL Automotive Performance Execution and Layout机动车性能实施与规划APQP Advanced Product Quality Planning先进产品质量计划
ASQ American Society for Quality美国质量协会
AV Appraiser Variation评估者的多样性
AVT Advance Vehicle Technology先进车辆技术
AWS Analytical Warranty System分析性的保修系统
AXOD Automatic Transaxle Overdrive Transmission自动变速驱动桥超速档传动系
B&A
Body & Assembly Operations (New Term: Vehicle
Operations)车身与组装操作(新术语：车辆操作)
BCG Business Consumer Group消费者工作组
BIC Best in Class等级中的最佳
BIS Body Shop Information System车身工作间信息系统BLI Business Leadership Initiative领导层初始意向BOM Bill Of Materials零件清单
BTB Bumper-to-Bumper保险杠到保险杠BTS Build-To-Schedule按日程建造
BUR Business Unit Review业务小组讨论CAS Capacity Analysis Sheet能力分析表
C/E Cause & Effect成因及影响
CA Customer Attribute消费者特性
CAD Computer Aided Design计算机辅助设计CAE Computer Aided Engineering计算机辅助工程CAP Corrective Action Plan纠正行动计划CBG Consumer Business Group消费者业务小组CB Continuous Build连续性生产
CC Critical Characteristic评价特性
CC Courtesy Copy抄送
CC Carbon Copy副本
CCC Customer Concern Classification客户问题分类CCC China compulsory certification中国强制认证CDS Component Design Specification零件设计参数CET Campaignable Events Team召回情况小组CETs Common External Tariff普通关税
CETP Corporate Engineering Test Procedures公司工程测试程序CFR Constant Failure Rate连续故障率
CHF
后桥速比
CIM Computer Integrated Manufacturing计算机综合制造CIWG Continuous Improvement Work Group持续改进工作组CL Centerline中心线
CMM Coordinate Measuring Machine协调测量设备
CMMS Common Material Management System通用材料管理系统
CMMS3Common Manufacturing Management System-3通用制造管理系统-3
Code X Pre-build focusing on exterior components制造前关注的外部零件
Code Y Pre-build focusing on interior components制造前关注的内部零件
CP Cost plan(马自达用语)由ECN引起的价格变动估计CP Common Position通用位置
CP Confirmation prototype确认样车（FORD 时间节点）
C p Relates the allowable spread of the
specification limits to the measure of the
actual variation of the process.
将参数限制允许限度下的展开与
程序实际多样性联系起来
CPE Chief Program Engineer首席项目工程师
C pk Measures the process variation with respect to
the allowable specification, and takes into
account the location of the process average
测量程序的多样性并将其考虑到
程序平均性的位置中
CPU Cost Per Unit单位成本
CQDC Corporate Quality Development Center公司质量开发中心CQIS Common Quality Indicator System一般质量指标系统CR Concern Responses问题回复
尼基劳达CRT Component Review Team零件讨论组
猛士CSA Corporate Security Administrator公司安全管理员CSI Customer Service Index客户服务指数DCO Duty Cycle Output责任循环结果DCP Dynamic Control Planning动态控制计划DDL Direct Data Link直接数据连接
Df Degrees of Freedom自由度
DFA Design for Assembly总成设计
DFM Design for Manufacturability制造能力设计
DFMEA Design Failure Mode Effects Analysis故障模式影响分析设计DFR Decreasing Failure Rate故障下降率
DMA Database Maintenance Administrator数据库维护管理人员DOE Design of Experiment试验设计
DOM Dealer Operations Manager经销商业务经理
DP Design Parameters参数设计
DQR Durability Quality and Reliability耐久性质量与可靠性DTD Dock to Dock码头至码头
DTD Design to Delivery设计到交付
DCV Design Confirmation Vehicle设计确认车
DV Design Verification设计验证
DVM Design Verification Method设计验证方式
DVP Design Verification Plan设计验证计划
Design Verification Process and Production
设计验证程序和产品验证DVP&PV
Validation
DVP&R Design Verification Plan & Report设计验证计划和结果DVPR Design Verification & Product Reliability设计验证和产品可靠性DVPV Design Verification and Process Verification设计验证和程序验证EAO European Automotive Operations欧洲机动车协会
EASI Engineering And Supply Information工程和供应信息
ECAR Electronic Connector Acceptability Rating电子连接接受比率
EDI Electronic Data Interchange电子数据交换
EESE Electrical and Electronic Systems Engineering电力及电子系统工程EMM Expanded Memory Manager扩展内存管理器
EMS Environmental Management System环境管理系统
EOL End of Line线的端点