英文回答：
1. Oil Change.
Materials: New oil, oil filter, oil drain pan, funnel, rags.
Procedure:
Park the car on a level surface and engage the parking brake.
Locate the oil drain plug and oil filter.
Place the oil drain pan under the oil drain plug.
Use a wrench to loosen the oil drain plug and allow the oil to drain into the pan.
Once the oil has drained, replace the oil drain plug and tighten it.
Remove the old oil filter using an oil filter wrench.
Lubricate the gasket on the new oil filter and install it by hand.
Tighten the oil filter using the oil filter wrench.
Add the new oil to the engine using a funnel.
汽车千斤顶 Check the oil level using the dipstick.
2. Tire Rotation.
Materials: Jack, jack stands, tire iron, torque wrench.
Procedure:
Park the car on a level surface and engage the parking brake.
Loosen the lug nuts on one wheel using the tire iron.
Place the jack under the car and raise it until the wheel is off the ground.
Place the jack stands under the car for safety.
Remove the lug nuts and take off the wheel.
Rotate the wheel to the next position according to the recommended rotation pattern.
Install the wheel and tighten the lug nuts by hand.
Lower the jack until the wheel is just touching the ground.
Use the torque wrench to tighten the lug nuts to the specified torque.
Repeat the process for the remaining three wheels.
3. Brake Inspection.
Materials: Flashlight, brake fluid, brake pads, brake rotors.
Procedure:
发布评论