广东工业大学
华立学院
本科毕业设计（论文）
玩具四驱车三维建模及动画仿真
系    部       机电工程学部         
专    业   机械设计制造及其自动化  
班    级     09机械4班           
学    号     ***********         
学生姓名         邹明珍           
指导教师         周艳琼         
2013年06月
摘    要
本次设计是基于solidworks 2010版本来进行四驱车的三维建模和工作状态的动画仿真的,其主要目的是为了开拓广大的玩具市场和满足爱车一族的珍藏喜好,。
本毕业设计主要内容是按真四驱车缩小对四驱车进行仿真设计造型,因考虑成本且实现运动和仿真，本设计简化了其结构而设计的四轮驱动模型车。本设计的材料选用塑料，以便减轻车子的负载和降低成本。把原本的动力源发动机改为电机驱动，通过简单的齿轮传动，改变运动方向和速度，使得轮轴的旋转，从而带动车轮的旋转，让车子运动起来，以达对真四驱车的运动仿真。最后一个部份则是对本次设计中所遇到的问题和解决方案进行的总结。
关键词：solidworks，三维建模，仿真，四驱车
Abstract
  This design of which main purpose is to develop the toy market and satisfy the collection of motorists preferences, is based on solidworks 2010 version, feeder of the bottled embryo, 3d modeling and stimulation of the status of the animation.
单人汽车
  The main content  of the graduation design is to design simulation modelling according to narrowing the raider buggies. Because of considering cost and realizing the simulation of motions, the design simplifies the structure and designs the four-wheel drive model car. The material selection of this design is plastic , so as to reduce the load and the cost of the car. The motor drive is instead of the source power engine. Through a simple gear transmission, changing the direction and speed of the car, making the rotation of the shaft, so that it can drive the rotation of the wheel, let the car move, and achieve the movement simulation of the true buggies .The last part is summarizing about the problems encountered and the solutions in this design.