汽车灯压铆工装的操作流程
    English Answer:
    Automotive Lamp Riveting Fixture Operation Procedure.
    1. Preparation.
    Ensure that the work area is clean and well-lit.
    Inspect the riveting fixture for any damage or wear.
    Confirm that the correct riveting tool is installed on the fixture.
    Calibrate the riveting tool according to the manufacturer's instructions.
    2. Loading the Fixture.
    Position the automotive lamp into the fixture.
    Align the lamp with the riveting tool.
    Secure the lamp by tightening the fixture clamps.
    3. Riveting Process.
    Activate the riveting tool.
    Apply downward pressure on the lamp until the riveting tool completes the rivet cycle.
    Release the pressure and remove the lamp from the fixture.
    4. Inspection.
    Inspect the riveted joint to ensure proper formation and strength.
    Check for any damage to the lamp or fixture.
    5. Maintenance.
    Clean the riveting tool and fixture regularly.
    Lubricate the moving parts as per the manufacturer's instructions.
    Inspect the fixture for wear and tear periodically.
    Safety Precautions.
    Always wear appropriate safety gear, including safety glasses and gloves.
    Ensure that the riveting tool is in good working order before operating.
    Be aware of the surroundings and potential hazards.
    Do not operate the fixture if it is damaged or malfunctioning.
    Chinese Answer:
    汽车灯压铆工装操作流程。
汽车铆钉    1. 准备。
    确保工作区域干净、光线充足。
    检查压铆工装是否有损坏或磨损。
    确认工装上安装了正确的压铆工具。
    根据制造商的说明校准压铆工具。
    2. 装载工装。
    将汽车灯放置到工装中。
    将灯与压铆工具对齐。
    通过拧紧工装夹具固定灯。
    3. 压铆过程。
    激活压铆工具。
    向下按压灯，直到压铆工具完成压铆循环。
    释放压力并从工装中取下灯。
    4. 检查。