14
S400_107 Panoramic sliding sunroof
The Golf Variant can be optionally equipped with panoramic sliding sunroof.
The panoramic sliding sunroof can be opened to a maximum length of 660 mm. In comparison with conventional sliding sunroofs, it offers the advantage that more light enters into the vehicle's passenger compartment.
The panoramic sliding sunroof offers a sense of space comparable with that of a convertible, but with less draught.
Unlike in a convertible, the fact that the occupants are better enclosed within the body increases significantly better accident protection.
Body
Panoramic sliding sunroof – glass panel 1 slid completely to the rear Sunroof roller blind – semi-extended
Wind deflector – fully raised
The panoramic sliding sunroof is a large glass roof consisting of two glass panels. It is bolted to a reinforcement frame in the body's roof structure. The seal between the panoramic sliding sunroof and the body is achieved by means of a gasket on the body side.长安奔奔迷你报价
The special feature of the panoramic sliding sunroof is guidance of the front panel over the rear, fixed glass panel into the sliding position. The glass panel is raised and moved via electrically driven Bowden cables.
To protect against excess sunlight, the panoramic sliding sunroof is equipped with an electrically driven sunroof roller blind.
The panoramic sliding sunroof is also equipped with an extending wind deflector.
帝豪ec718价格15
S400_072
Components
(exploded diagram)
Glass panel 2, fixed
Glass panel 1, movable
Roof cut-out gasket
Wind deflector
Right-hand mechanism
Electric drive,
sunroof roller blind
Sunroof roller blind mounting,sunroof roller blind retracted
Left-hand mechanism
Electric drive,
panoramic sliding sunroof
Mounting frame
Right Bowden cable for opening and closing glass panel 1
Electrical connection cable
Left Bowden cable
for opening and closing glass panel 1
16
Body
S400_116
S400_114
S400_113
S400_117
S400_118
Adjustment of glass panel 1
Glass panel 1 is moved to the relevant position via a mechanism in the panoramic sliding sunroof.
The mechanism is driven via an electric motor by means of a Bowden cable attached on both the left and right-hand sides. The Bowden cables move the mechanism within an adjustment range; the relevant roof positions can be reached in this way. By means of the front end pieces with separate guide plate tracks and the relevant slides, glass panel 1 is clearly positioned in the front area.
Closed position
Position of the mechanism Roof vent position
Vent position
At the start of the tilting movement, the rear section of the roof is raised via a guide plate and pins which run in this. The roof moves to the vent position.
Guide plate
Pin
Bowden cable
Guide plate movement
Position of the mechanism Roof sliding position
Sliding position
Guide plate movement
Guide plate
Pin蓝瑟翼豪陆神
If the Bowden cable continues to be moved, starting from the vent position, the front section of the
mechanism is also raised and glass panel 1 is moved to the sliding position.
This is also carried out by means of a guide plate and pins running in it. The slide runs towards the separate end piece and guide plate track. Glass panel 1 can then be moved backwards over fixed glass panel 2. When closing, the process runs in reverse order.
End piece
Guide plate track
Slide
17
S400_082
S400_081
S400_084
Operation
The panoramic sliding sunroof and the sunroof roller blind are operated via a common switch in the display in the front area of the roof lining.
This switch has three functions and adjustment options:
●
Turning the switch to move
glass panel 1 to the sliding position ●
Pressing the switch to move glass panel 1 to the vent position
●
Short or long push on the sunroof roller blind buttons (one-touch or jog mode) to move the sunroof roller blind
Emergency actuation
If the situation necessitates, glass panel 1 or the sunroof roller blind can be closed after blocking by constantly pulling on the switch or via jog mode. To do this, the rotating ring must be in the "sliding sunroof closed" position. Glass panel  1 is then closed without closing force limitation.
Emergency adjustment
If the panoramic sliding sunroof can no longer be adjusted electrically, closing can alternatively be carried out via mechanical emergency adjustment using a tool (Allen key, 4  mm).
As a result of mechanical emergency adjustment, all values (pre-selection positions, protection ranges and partial trapping force limit value increases) are "erased".
Malfunctions such as, e.g. closing force limitation triggering, may therefore occur when glass panel  1 is next adjusted. Following emergency adjustment, a workshop visit is therefore vital to re-adjust the panoramic sliding sunroof.
倍耐力轮胎怎么样
Open, press switch - press function for vent position
Close, pull switch - pull function for zero position and emergency closing
Rotating ring
Display in the roof lining Switch for
panoramic sliding sunroof
Roof closed, zero position
Roof completely open,
end of sliding position Comfort position, sliding position Roof slightly open, wind deflector extended, sliding position
Positions for open roof, sliding position
Sunroof roller blind button "open"
Sunroof roller blind button "close"
18
Body
Raising glass panel 1 to the vent position
When raising glass panel 1 to the vent position, the following situations are possible:
●
In rotating ring position "roof closed", pressing the switch raises glass panel  1 to the vent position. ●
Glass panel 1 can be closed by pulling on the switch; it moves back to the zero position.
奇瑞旗云价格S400_108
S400_074
Emergency actuation
If the situation necessitates, glass panel 1 can be closed after stopping by constantly pulling on the switch.  Glass panel 1 is then closed without closing force limitation.
S400_101
变速箱渗油问题大吗Switch display in rotating ring position "roof closed" on use of the press and pull function
Open, press switch - press function for vent position
Close, pull switch - pull function for zero position and emergency closing
Automatic operation =actuate switch briefly
Manual operation =actuate switch for a longer
time
Glass panel 2fixed
Glass panel 1
raised to vent position
Glass panel 1 raised to vent position, vent position Sunroof roller blind closed