新能源动力电池进厂维修流程
1.车辆进入维修场地前需要先完成安全检查。
Before the vehicle enters the maintenance site, it needs to complete a safety check.
2.车辆接待员会询问车主有关车辆故障的情况并登记。
The vehicle receptionist will inquire about the vehicle's problems and register them.
3.车辆会被指派到特定的维修区域。
The vehicle will be assigned to a specific repair area.
4.技术人员对车辆进行初步检查，确定维修项目。
Technicians conduct a preliminary inspection of the vehicle to determine the repair items.
5.车辆会被提升至工作高度，便于技术人员进行维修。
The vehicle will be raised to a working height for technicians to carry out the repair.
6.开始拆卸电池组并清洁相关部位。
Start disassembling the battery pack and cleaning the related parts.
7.检查电池组的外观和连接线路。
Inspect the appearance and connection of the battery pack.
8.检测电池组的电压和电流情况。
Test the voltage and current of the battery pack.
9.根据检测结果判断电池组是否需要更换或修复。
Determine whether the battery pack needs to be replaced or repaired based on the test results.
10.如需要更换电池组，准备好新的电池组并进行安装。
If the battery pack needs to be replaced, prepare a new battery pack and install it.
11.对电池组进行充电和放电测试，确保其正常工作。
Conduct charging and discharging tests on the battery pack to ensure its normal operation.
12.维修结束后，还需进行电池组的再次检查和测试。
After the repair is completed, the battery pack needs to be checked and tested again.
13.技术人员关闭车辆维修订单并记录维修过程。
Technicians close the vehicle repair order and record the repair process.
14.车辆下线并等待质检员进行最终检查。
The vehicle is taken offline and awaits final inspection by the quality inspector.
15.质检员检查车辆的安全性和维修质量。
The quality inspector checks the vehicle's safety and repair quality.
16.确认车辆经过质检合格后，通知车主前来领取车辆。
After confirming that the vehicle has passed the quality inspection, notify the owner to collect the vehicle.
17.车主进行取车手续并支付维修费用。
The owner completes the formalities for taking the car and pays the repair costs.
新能源电池
18.车辆维修流程结束，车主可驾驶车辆离开。
The vehicle repair process is completed, and the owner can drive the vehicle away.