Important Notes
Chassis Dimensions
Front Axle to Back of Cab: +375 mm for CAB-SLP, +204 mm for CAB-SSLP. D-measure includes a front clearance of 74 mm and for rigid trucks also a subframe of 120 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension. All dimensions are for unladen chassis and any tag axles down.
Weight and dimensions are based upon the following tyres:
Chassis weight includes oil, water, AdBlue, 0 litres fuel and without driver. Kerb weight can vary ± 3%.
Turning diameters are theoretically calculated.
Legal weights can differ from country to country.
For more detailed weight information, including optional equipment weights, ask your Volvo sales contact to enter your specification into the Volvo Weight Front Axle Tyres: 295/80R22.5 Drive Axle Tyres: 295/80R22.5
Chassis Dimensions [mm]
WB Wheelbase
3495
3845
4195
4495
4995
5495
A Overall Chassis Length
7610 8710 9710 9360 10160 11010      D Center of rear axle to front of body 2856 3206 3556 3856 4356 4856      N Rear Overhang (Min.) 830 830 1240 830 830 830      N
Rear Overhang (Max.)
1325
2075
2725
2075 2375 2725
T Theoretical Wheelbase
4180 4530
4880 5180 5680 6180      Y Center of Gravity for Payload (Min.) -57 0 55 89 162 232      Y Center of Gravity for Payload (Max.) -57 0 55 89 162 232      W Body Length (Min.) 5829 6415 7004 7535 8390 9249      W Body Length (Max.) 5829 6415 7004 7535 8390 9249
Chassis Weights [kg]
Front Axle 4020 4010 4010 4055 4075 4105      Rear Bogie 3520 3605 3700 3650 3710 3790      Kerb Weight
7540 7615 7710 7705 7785 7895      Payload (including body, driver, fuel, etc.) 20560 20485 20390 20395 20315 20205
Turning Diameter [mm]
Turning Circle Diameter Kerb to Kerb 14900 16000 17100 18000 19500 21100
Turning Circle Diameter Wall to Wall 16300
17400 18500 19400
21000 22500
Plated Weights [kg]
Design
Gross Vehicle Weight
28100  Gross Combination Weight  32000  Front Axle  7100  Rear Bogie  21000
■ Standard Equipment □ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS).
□  TGW-4G Telematics gateway with 4G modem
■  RC-ROUGH Rough road conditions
□  TIPP-PRE Tipper vehicle preparation ■  UNIFORM Basic platform vehicle
Core components    ■  CHH-HIGH Chassis height high - approx. 1000 mm above ground level    ■  RADD-BR Rear leaf suspension, 2 axles - 2 driven (B-ride)    □  CAB-DAY Day cab □  CAB-SLP Sleeper cab □  CAB-SSLP Comfort cab    ■  EU6SCR Euro 6 emission level with Selective Catalytic Reduction
(SCR), particle filter and Exhaust Gas Recirculation (EGR)
■  D8K280 Six cylinder diesel engine, 7.7 litre Euro 6 SCR + EGR (Diesel
Particulate Filter), 280 hp, 1050 Nm
□  D8K320 Six cylinder diesel engine, 7.7 litre Euro 6 SCR + EGR (Diesel
Particulate Filter), 320 hp, 1200 Nm
□  D8K350 Six cylinder diesel engine, 7.7 litre Euro 6 SCR + EGR (Diesel
Particulate Filter), 350 hp, 1400 Nm
□  EBR-CEB Engine compression and exhaust brake ■  EBR-EPG Engine brake with Exhaust pressure governor, EPG    □  AL306 Automatic 6-speed Allison gearbox, max input torque 1695 Nm □  AT2412F I-Shift automated mechanical 12-speed gearbox,  2400 Nm ■  ZTO1109 Overdrive 9 speed manual ZF gearbox, 1200 Nm
□  RTH2180C Rear hub reduction tandem axles - bogie load 21 tonnes, GCW
80 tonnes version C
■  RTS2370A Rear single reduction tandem axles - bogie load 23 tonnes,
GCW 70 tonnes
Packages    □  DRIVEFE Driver convenience package FE    □  VISIFE Visibility package FE - Optimizing the drivers field of vision
around the cab
□  AIRFLOW Airflow package FL
□  AUDIODAB Audio System DAB ■  AUDIOPD Audio Preparation DAB kit, incl. DAB-amplifier    Chassis    ■  FST-PAR    2 leaf front parabolic suspension (normal stiffness)    ■  FAL7.1 Front axle load 7.1 tonnes □  FAL7.5 Front axle load 7.5 tonnes □  FAL8.0 Front axle load 8.0 tonnes □  FAL9.0 Front axle load 9.0 tonnes    ■  RAL21 Rear bogie load 21 tonnes    ■  RSTAB1 Rear stabilizer with normal stiffness    □  EBS-MED EBS (Electronic Brake System) medium package ■  EBS-STD EBS (Electronic Brake System) standard package
■  RST-PAR1 Rear parabolic leaf suspension    ■  ABS Lock free brakes
■  FRAME300 Frame rail section external height 300 mm    ■  FST8080 Frame section thickness - web 8.0 mm / flange 8.0 mm    □  FIL-FBEB Frame inner liner from front of bogie to end of bogie □  FIL-FBEF Frame inner liner from front of bogie to end of frame □  FIL-TXEB Frame inner liner from transmission cross member to end of
bogie
□  FIL-TXEF Frame inner liner from transmission cross member to end of
frame
■  2BATT170 Batteries 2x170 Ah □  2BATT225 Batteries 2x225 Ah
cab
■  R160A56 Right 160 litre aluminium 560 mm high D-shaped diesel tank.
Usable volume is 97% of stated volume.
Min volume 160l  Max volume 630l    ■  UL-FUEL Without left diesel tank    ■  ADTP-R AdBlue tank on right hand side    ■  WHC-FIX1 One fixed wheel chock □  WHC-FIX2 Two fixed wheel chocks    □  TB-L33 Toolbox 58 litre on the left hand side - width 330 mm, height
310 mm, depth 660 mm
□  TB-L75 Toolbox 106 litre on the left hand side - width 755 mm, height
430 mm, depth 550 mm
□  TOWMBRH High mounted towing member, in centre of frame    ■  RFEC-S Rear frame end, straight
cut (for regular platform applications)    □  C-RI4040 Coupling Ringfeder 4040 G-150 □  C-RI5055 Coupling Ringfeder 5055 G-150
□  C-RO400G Towing coupling Rockinger 400 G-150 □  C-RO430G Towing coupling Rockinger 430 G-150 □  C-RO50 Towing coupling Rockinger 50 mm
□  TOWR-ONE One rear towing device in frame end cross member    □  TBC-EC Trailer brake connection, European Community
□  TRBR-STA Stationary trailer brake control    □  RUP-FIX2 Fixed rear underrun protection, EC approved    □  RFEND-B Använd samma (efter att vi reviderat på stora listan) ■  RFEND-T Transport mounted one-piece rear fenders    □  RFH-103 Rear fender installation with quarter fender height 103 mm
from bottom of rail
□  RFH-BAS Optimal rear fender installation with regard to legal demands,
wheel/tyre sizes, chassis height and fifth wheel height.
□  RFH-HIG High mudguard installation height □  RFH-LOW Low mudguard installation height
□  ATANK-AL Aluminium air tanks ■  ATANK-ST Steel air tanks    □  FRACLOS Frame end closing    □  2024GSR General safety regulations 2024    Rims and tyres    □  RT-AL Brushed aluminium rims with std holes (long stud fixing) on all
axles
□  RT-ALDP Dura-Bright polished aluminium rims with std holes (long stud
fixing) on all axles
□  RT-ALP Polished aluminium rims with std holes (long stud fixing) on all
axles
■  RT-STEEL Steel rims on all axles    ■  SPWT-F Spare wheel with tyre equal to front wheel    □  SWCP-R Spare wheel carrier mounted behind rear axle and below frame □  SWCP-T Spare wheel transport mounted  on top of frame ■  SWCP-TP Spare wheel carrier transport mounted with the spare wheel on
top of the frame rails
Powertrain equipment    □  TP-BAS I-Shift basic gear changing □  TP-DICON adapts the gearbox’s function to the specific conditions in the
distribution and construction segmen
□  TP-FUEC This software package is ideal for long-haul operations where
strong emphasis is placed on fuel econ
载重汽车□  APF-ENH Enhanced PTO functions (Auto Neutral / Reverse Inhibit).
Garbage - Auto Neutral working on parking brake.
□  APF-ENH2 Enhanced PTO functions (Auto Neutral / Reverse Inhibit).
Garbage - Auto Neutral working on service brake.
■  CS39A-O Single plate clutch, plate diameter 395 mm
■ Standard Equipment □ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS).
□  TC-HWO Oil cooler for hydraulic transmissions – water/oil
□  TC-MWO Basic performance cooler for manual/I-Shift gearboxes - water/oil
■  AIRIN-HI High air intake
□  ACL1ST-S Air cleaner with additional filter element
□  CCV-C Closed crankcase ventilation
■  CCV-OX Open crankcase ventilation with oil separator and a maintenance free gas centrifuge
■  AF-E Electrically heated fuel filter
■  EST-AID Engine start pre-heating element
□  220EBH08 Electrical engine block heater, 220V/0.8kW
□  PTER-100 Rear engine mounted clutch independent power-take-off with flange connection (DIN 100 / ISO 7646)
□  PTER-DIN Rear engine mounted clutch independent PTO with splined shaft groove (female) for a close coupled pump (DIN 5462 / ISO 7653)
□  PTER1400 Rear engine mounted clutch independent power-take-off with flange connection (SAE 1410 / ISO 7647)
□  PR-HP4T Rear gearbox mounted (top of torque converter) Hydrocar PTO with connection (DIN 5462 / ISO 7653) for pump (400 Nm) □  PR-HP4TL Rear gearbox mounted (top of converter) Hydrocar low speed PTO with connection (DIN 5462 / ISO 7653) for pump (400 Nm)
□  PR-HP6TH Rear gearbox mounted (top of converter) Hydrocar high speed PTO with connection (DIN  5462 / ISO 7653) for pump (600 Nm)
□  PR-HP6TL Rear gearbox mounted (top of converter) Hydrocar low speed PTO with connection (DIN 5462 / ISO 7653) for pump (600 Nm)
□  PTR-FH1 Rear gearbox mounted Hydrocar S81 PTO with flange
connection (DIN 90 / ISO 7646) for propeller shaft (800 Nm) □  PTR-FH2 Rear gearbox mounted Hydrocar S84 PTO with flange
connection (DIN 90 / ISO 7646) for propeller shaft (430 Nm) □  PTR-FH5 Rear gearbox mounted Hydrocar S88 PTO with flange
connection (DIN 90 / ISO 7646) for propeller shaft (450 Nm) □  PTR-PH1 Rear gearbox mounted Hydrocar S81 PTO with connection (DIN 5462 / ISO 7653) for pump 800 Nm max.  Exceptions for AT2412F: 1000 Nm max
□  PTR-PH2 Rear gearbox mounted Hydrocar S84 PTO with connection (DIN 5462 / ISO 7653) for pump (430 Nm)
□  PTR-PH4 Rear gearbox mounted Hydrocar S88 PTO with connection (DIN 5462 / ISO 7653) for pump (450 Nm)
□  PTR-PK Electrical and solenoid prep kit for gearbox PTO
□  PTR-ZF2 Rear gearbox mounted ZF PTO with flange connection (DIN 100 / ISO 7646) for prop shaft (410 Nm)
□  PTRD-D1D Rear gearbox mounted double PTO with flange connection (DIN 120 / ISO 7646) for propeller shaft (550 Nm) and connection (DIN 5462 / ISO 7647) for pump (1000 Nm)
□  PTRA-PH1 Extra rear gearbox mounted PTO with double S81 connections (DIN 5462 / ISO 7653) for pump
□  PTRA-PH2 Extra rear gearbox mounted PTO with double S84 connections (DIN 5462 / ISO 7653) for pump
□  HPG-F101 Gearbox mounted hydraulic pump F1-101, fixed displacement, single flow
□  HPG-F41 Gearbox mounted hydraulic pump F1-41, fixed displacement, single flow
□  HPG-F51 Gearbox mounted hydraulic pump F1-51, fixed displacement, single flow
□  HPG-F61 Gearbox mounted hydraulic pump F1-61, fixed displacement, single flow
□  HPG-F81 Gearbox mounted hydraulic pump F1-81, fixed displacement, single flow
□  ETC Electronic throttle control - dash mounted switch for PTO speed control
Cab interior
■  STWPOS-L
Left hand drive □  STWPOS-R
Right hand drive
■  TAS-DIG4
version 2, one day digital tachograph, EC approved according to EU regulation 2020/1054
□  IMMOBIL Immobiliser
□  WARNLAMP Portable amber warning lamp with batteries
□  WARNVEST Warning vest. Fulfils European standard according to EN 471
class 2.
■  AIDKIT First aid kit containing sticking plaster, washing and drying
pads, compresses, elastic bandages, respiratory mask, gloves and scissors.
□  AIDKIT1B First aid kit fulfilling German requirements containing
instruction, scissors, triangular cotton bandages, gauze bandages, bandaging cloths, gauze dressings, adhesive bandage, protective gloves, adhesive tape, first aid packets, rescue sheet.
□  CRUIS-E2 Cruise control with i-roll □  CRUISEC Basic cruise control    Cab exterior    □  AUXFS Extra footstep in cab side    □  CF-AFS Retractable extra footstep in the cab front bumper    □  RCABS-A Air rear cab suspension ■  RCABS-M Mechanical rear cab suspension
□  AD-ROOFA Adjustable roof air deflector    □  AD-SIDES Short cab side air deflectors
□  HL-CLEAN High pressure headlamp cleaner    ■  HL-ADJ Adjustable headlamps to adjust the height of the light beam    ■  DRL-LED V-shaped ("V-light") day running light (LED).
Turned on low beam gives a dimmed "V-light".
□  BEACON-P Prepared for roof beacons
□  BEACONA2    2 amber beacon, roof mounted warning lamps
■  HORN-F1S One front mounted (behind grille) single tone air horn, Jericho.
Operated by steering wheel buttons.
□  HORN-R2S Two chromed single-tone air horns on the roof, operated by
steering wheel buttons
Superstructure preparations    □  FBA-BTF Front body attachments for flexible body
□  FBA-BTSF Front body attachments for semi-flexible body    □  RBA-T1 Rear body attachments, plates □  RBA-T2 Rear body attachments for helper frame
□  HBA-FSFB Holes for body attachments, flexible/semi-flexible body
□  TAILPREP Tail lift preparation kit    Services    ■  WVTA Whole Vehicle Type Approved
■ Standard Equipment □ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS).