OWNERS MANUAL TT1600R Mini Bike
A s s e m b l y V i d e o F e a t u r e s a n d O p e r a t i o n
C a r t o n  C o n t e n t s
Located within top of the packing foam you will find the Front
Fender, Rear Fender, Right and Left Footrest assemblies, Handlebar Clamps, all hardware and Tool Kit. The Front wheel and charger are located at the bottom of the packaging.
OPEN THE TOP OF THE SHIPPING BOX and Remove the contents from the top of the foam inserts. Inspect and confirm that you have all parts and Hardware. Remove the foam separators that protect the components from damage during shipping. Remove the Front wheel and brake rotor. Inspect the contents of the box for scratches in the paint, dents or kinked Brake lines that may have occurred during shipping. Because these vehicles are 90 percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.
A l l o w  u p  t o  1 H o u r  f o r  a s s e m b l y .
Check for all parts and hardware before beginning assembly. Follow these instructions carefully, Checking all bolts, Nuts and screws for tightness during the assembly process. D O  N O T  S q u e e z e  t h e  b r a k e  l e v e r s  u n t i l  t h e  b r a k e s  h a v e  b e e n  f u l l y  a s s e m b l e d
Set the bike on a stable platform at least 18” off the ground. Position the front fork so that it hangs off one end of the pla
tform to facilitate front wheel and brake assembly installation.
Enjoy the process and take your time to ensure all components are secure. Checking all bolts, nuts and screws for tightness during the assembly process.
Front Wheel
Folding Foot
Pegs
Handle Bars assembly
Front Fender
Rear Fender & Tool Kit
Battery Charger
Harware parts
Features and Controls
PRE-RIDE CHECKLIST
LOOSE PARTS
Check and secure all fasteners before every ride. Make sure handlebar clamp bolts are locked properly in place. There should not be any unusual rattles or sounds from loose parts or broken components. If you are not sure, ask an experienced mechanic to check.
BRAKE
Check the brake for proper function. When you squeeze the lever, the brake should provide positive braking action. When you apply the brake with the speed control on, the brake cut-off switch will stop the motor. When the brake is not in use, the Front and Rear wheel should spin freely without drag.
FRAME, FORK AND HANDLEBARS
Check for cracks or broken connections. Although broken frames and chassis components are rare, it is possible for an aggressive rider to Jump, run into a curb or wall and wreck, bend or break a frame, fork or suspension components. Get in the habit of inspecting yours regularly.
Safety Gear
Always wear proper protective equipment such as an approved safety helmet, elbow pads and knee pads. Always wear athletic shoes (lace-up shoes with rubber soles), never ride barefooted or in sandals, and keep shoelaces tied and out of the way of the wheels, motor and drive system.R I D E R S S A F T E Y W A R N I N G
T h i s M i n i B i k e i s d e s i g n e d f o r O f f R o a d U s e O n l y a n d h a s b e e n
d e s i g n e d a n d i n t e n d e d f o r u s e i n c o n t r o l l e d e n v i r o n m e n t s f r e e o f p o t e n t i a l t r a f f i c h a z a r d s a n d n o t o n p u b l i c s t r e e t s.I f i s u p t o t h e e n d u s e r t o k n o w t h e l o c a l l a w s g o v e r n i n g s u c h v e h i c l e s a n d w h e r e t h e y a r e l e g a l t o b e r i d d e n.B u r r o m a x m a k e s n o c l a i m t h a t t h e s e b i k e s a r e s t r e e t l e g a l.
Riding an electric mini bike can be a hazardous activity.  Certain conditions may cause the equipment to fail without fault of the manufacturer. Like other electric products, these vehicles can and are intended to move, and it is therefore possible to lose control, fall off and/or get into dangerous situations that no amount of care, instruction or expertise can eliminate. If such things occur you can be seriously injured or die, even when using safety equipment and other precautions.
R I D E A T Y O U R O W N R I S K A N D U S E C O M M O N S E N S E.
It is your responsibility to review this information and make sure that all riders understand all warnings, cautions, instructions and safety topics and assure that young riders can safely and responsibly use this product. Burromax recommends that you periodically review and reinforce the information in this manual with younger riders, and that you inspect and maintain your product to insure rider safety. The recommended Minimum rider age is 16 years or older is only an estimate, and can be affected by the rider’s size, weight or skills. Any rider unable to fit comfortably on the  Mini Bike should not attempt to ride it. A parent’s decision to allow a person younger than 16 years old to ride this product should be based on the child’s maturity, skill and ability to follow rules. DO not exceed the maximum recommended rider weight of 300 lbs. Rider weight does not necessarily mean a person’s size is appropriate to fit or maintain control of the vehicles.
Keep this product away from small children and remember that this product is intended for use only by persons who are completely comfortable and confident when operating this Mini Bike.
Do not touch the brakes or electric motor on your electric mini bike when in use as they can become very hot.
Always check and obey any local laws or regulations which may affect the locations where the vehicles may be used.
Ride defensively. Watch out for potential objects that could catch your wheel or force you to swerve suddenly or lose control.
R I D E R S S A F T E Y W A R N I N G
Be careful to avoid pedestrians, skaters, skateboards, scooters, bikes, children or animals who may enter your path, and respect the rights and property of others.
Do not activate the Throttle on the hand grip unless you are on the electric mini bike and in a safe, outdoor environment suitable for riding. These bikes were manufactured for performance and durability but are not impervious to damage. Jumping or other aggressive riding can over-stress and damage any product, including the electric motorbike, and the rider assumes all risks associated with high-stress activity.
Be careful and know your limitations. Risk of injury increases as the degree of riding difficulty increases. The rider assumes all risks associated with aggressive riding activities. Maintain a hold on the handlebars at all times. Never carry passengers or allow more than one person at a time to ride the electric mini bike without proper skills and accessories. Never use near steps or swimming pools. Keep your fingers and other body parts away from the drive chain, Wheels, Brake Rotors, steering system, and all other moving components. Never use headphones or a cell phone while riding this bike. Never hitch a ride with another vehicle.
Do not ride the vehicles in wet or icy weather and never immerse the electric mini bike in water, as the electrical components and drive components could be damaged by water or create other hazards or possibly unsafe conditions.
These vehicles are intended for use on flat, level ground without loose debris such as rocks or gravel. Wet, slick, bumpy, uneven or rough surfaces may impair traction and contribute to possible accidents. Do not ride the electric mini bike in mud, ice, puddles or water. Avoid excessive speeds that can be associated with downhill rides.
P r o p e r C l o t h i n g
Always wear an approved safety helmet (with chin strap securely buckled). A helmet may be legally required by local law or regulation in your area. Elbow pads and knee pads, a long-sleeved shirt, long pants and gloves are recommended. Always wear athletic shoes (lace-up shoes or Boots with rubber soles), never ride barefooted or in sandals, and keep shoelaces tied and out of the way of the wheels, motor and drive system. BATTERY AND CHARGER WARNINGS
1.The charger supplied with the electric mini bike should be
regularly examined for damage to the cord, plug,
enclosure and other parts, and in the event of such
damage, the bike must not be charged until the charger
has been repaired or replaced.
2.Use ONLY Burromax Li-ion Battery Charger Specific to
the TT1600R.
3.Do not operate a charger near flammable materials.
4.Unplug charger and disconnect from bike when not in use.
5.Chargers are not waterproof and should never be used in
wet conditions. Water and moisture will damage the
charger so always use the charger in a clean, dry area
6.Do not store or charge the battery in extreme
temperatures. Above 110° F or below 32° F
7.Keep away from fire.
8.Do not disassemble the battery. Do not use Lead Acid or
automotive battery chargers as it will damage the battery
and void your warranty.
9.Turn the power switch OFF before charging the battery or
conducting any maintenance procedures.
10.FAILURE TO USE COMMON SENSE AND HEED THE ABOVE
WARNINGS INCREASES RISK OF SERIOUS INJURY. USE
WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION
新大洲电动车TO SAFE OPERATION.
11.Recycle batteries at locations that accept
Lithium Ion Batteries—DO NOT THROW IN THE TRASH P O W E R W A S H I N G W A R N I N G S
U s e c a r e w h e n w a s h i n g t o a v o i d p o i n t i n g t h e w a t e r s t r e a m s
d i r
e c t l y a t t h e e l e c t r i c a l c o m p o n e n t s.A v o i d p o i n t i n g t h e w a t e r a t t h e T h r o t t l e a n d S p e e d o m e t e r,B r a k e H a n d l e s,a n d t h e e n d s o
f t h e M o t o r. Do not use Hi Pressure to wash the plastic body or the hydrographics may come off! Do not put water directly into the battery housin
g vents! Hig
h Pressure washing tires, wheels, brakes and under the bike or frame components poses no danger to the bike when washing. Be Careful and thoughtful of all wiring and Electrical Components when washing.