Easy-clean device surfaces with
3M ™ Novec ™ Electronic Grade Coatings
Your devices need extra protection to help keep them looking good and functioning properly – and 3M has the solution.  Get easy-clean, anti-smudge surfaces with these 3M™ Novec™ Electronics Grade Coatings. These fluoropolymer silanes are diluted in a segregated hydrofluoroether solvent, providing clear, low viscosity, low surface tension coating solutions. They form thin, optically transparent coatings, improving the lubricious feel of a variety of glass and glass-like surfaces used in touchscreens and other displays.
Not for specification purposes. All values @ 25°C unless otherwise specified.1
Novec coatings can be applied using spray, dip or syringe methods. The methods listed are often preferred. For spray application, 3M recommends using engineered controls or personal protective equipment (PPE) to minimize worker exposure. 2
Preferred conditions. For other processing conditions, contact your 3M technical representative. 3
Static contact angle on glass substrate. Measured contact angles can vary based on the type of surface, surface roughness and the application method.4
VOC exempt per the U.S. EPA. The U.S. EPA defines a VOC as “any compound of carbon, excluding carbon monoxide, carbon dioxide, carbonic acid, metallic carbides or carbonates and ammonium carbonate, which participates in atmospheric photochemical reactions.”
©2015 3M. All rights reserved.
3m汽车贴膜
3M and Novec are trademarks of 3M Company.
60-5002-0807-3
8/2015
IMPORTANT NOTICE: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Contact your local 3M representative or visit 3M/Novec for more information. Warranty and Limitation of Liability:  if there is a defect in this product, your exclusive remedy shall be product replacement or refund of the purchase price.  3M MAKES NO OTHER WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  3M will not be liable for any direct, indirect, special, incidental or consequential damage related to the use of this product.Electronics Materials Solutions Division 3M Center, Building 224-3N-11St. Paul, MN 55144-10001-800-810-8513  www.3M/novec
Contact your 3M technical representative for more information on other application, thickness and curing options.