Table of Contents
Introduction: (3)
Select Profile: (4)
Tool Table - Create Tool(s) (5)
Tool properties: (5)
Tool Color R/G/B: (6)
Simulation Configurations - create stock (7)
What if plugin is greyed out (7)
Stock: (8)
Cube: (8)
Cylinder: (9)
STL Import: (10)
Color: (11)
Update Tools: (11)
Apply: (11)
Close: (11)
Export current workpiece (12)
Simulation window (13)
How to start Simulation (13)
特斯拉股价
Introduction:
The ModuleWorks Material Removal Simulation module in the Mach controller displays stock and tool geometries and performs material removal simulation by reading the toolpath coordinates from the machine coordinate system.
This document shows you how to set the parameters for the ModuleWorks Material Removal Simulation.
The simulation is displayed only when the program is run on the CNC controller.
Select Profile:
Launch the Mach controller application and select the ‘ModuleWorks’ profile. This allows users to see 3D material removal simulation and other simulation related settings.
Tool Table - Create Tool(s)
On the top ribbon bar, click View > Tool Table…
Tool properties:
The columns in the Tool Table contain the tool parameters. The parameters in the red rectangle in the above image, from Diameter to Tool Color B, are used for material removal simulation.
Tool parameters used for material removal simulation
Tool parameters used
by the Mach controller Holder Diameter
Corner radius Taper angle
F l u t e  L e n g t h  S h o u l d e r  L e n g t h  H o l d e r  L e n g t h